Stainless Hot
Finished Unequal Leg Angle Specifications And Information
| T304/304L |
A276, A479, QQ-S-763, SA479,
A484 |
| T304/304H |
A276, A479, QQ-S-763, SA479,
A484 |
| T316/316L |
A276, A479, QQ-S-763, SA479,
A484 |
- Note: For unequal leg angles, the longer leg determines the tolerance for the length of each leg.
- Weight: for unequal angles of 6 lb/ft or less, the weight tolerances shall not exceed plus or minus 7-1/2 %. For unequal angles over 6 lb/ft, the weight tolerance shall not exceed plus or minus 4-1/2 %.
- Length of Legs: for unequal angles having legs or flanges up to 6 inch, inclusive, the length tolerance shall not exceed plus or minus 1/8 inch. For unequal angles having legs or flanges over 6 inch, the length tolerance shall not exceed plus 3/16 inch and minus 1/8 inch.
- Squareness of Legs: The tolerance for the right angle between the legs is plus or minus 2 % degrees.
HF: 1/8 inch in any 5 foot; but may not exceed 1/8 inch X (length in ft/5)
