800-222-6144

Home » Stainless Grades » 400 Series Stainless » 410HT Stainless Steel
featuredimage2

410HT Stainless Steel

Penn Stainless inventory now includes Alloy 410 HT  (UNS S41000) in sheet, sheet coil, plate, round bar, processed flat bar and tubular products.

 

General Properties

Alloy 410 HT is the basic, general purpose,  heat treated version of Type 410. It is a martensitic type, used for general purpose, where corrosion is not severe. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. .

Specifications: UNS S30400 / S30403

Applications:

Applications requiring moderate corrosion resistance and high mechanical properties are ideal for Alloy 410HT. Examples of applications that frequently used Alloy 410HT include:

  • Cutlery
  • Steam and gas turbine blades
  • Kitchen utensils
  • Bolts, nuts, screws
  • Pump and valve parts and shafts
  • Mine ladder rugs
  • Dental and surgical instruments
  • Nozzles
  • Hardened steel balls and seats for oil well pumps

 

Standards:

  • ASTM/ASME: UNS S41000
  • EURONORM: FeMi35Cr20Cu4Mo2
  • DIN: 2.4660

Corrosion Resistance:

  • Good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive environments
  • Its exposure to everyday activities (sports, food preparation) is generally satisfactory when proper cleaning is performed after exposure to use
  • Good corrosion resistance to low concentrations of mild organic and mineral acids

 

Welding Characteristics

  • Readily welded by all standard methods
  • To reduce the risk of cracking, it is suggested to pre-heat the work piece to 350 to 400oF (177 to 204oC)
  • Post weld annealing is recommended to retain maximum ductility

Heat Treatment

  • The proper hot work range is 2000 to 2200oF (1093 to 1204oC)
  • Do not work this material below 1650oF (899oC)

 

Chemical Properties:

C Mn Si P S Cr Ni
410HT 0.15 max 1.00 max 1.00 max 0.04 max 0.03 max min: 11.5
max: 13.5
0.50 max

Mechanical Properties:

Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
410HT 65 (450) 30 (205) 20 217 96

Mechanical Properties of Heat Treated 410:

Heat Treatment T410 (0.14%C) Hardened 1800°F (982°C)
Rockwell Hardness 0.2% YS, Ksi (MPa) UTS, Ksi (MPa)
Annealed* 81 HRB 45.4  (313) 80.4  (554)
 Hardened & Tempered 400°F (204°C) 43 HRC 156.1  (1076)  202.9  (1399)
 Hardened & Tempered 550°F (288°C)  40 HRC 148.3  (1022)  187.0  (1289)
Hardened & Tempered 600°F (316°C) 40 HRC 148.8  (1026) 186.1  (1283)
Hardened & Tempered 800°F (427°C) 41 HRC 132.9 (916) 188.5  (1300)
Hardened & Tempered 900°F (482°C) 41 HRC 122.6 (845) 154.3  (1063)
Hardened & Tempered 1000°F (538°C) 35 HRC 127.9  (882) 154.3  (1063)
Hardened & Tempered 1200°F (649°C) 98 HRB 85.5  (589) 111.2  (767)

 Physical Properties:

Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.276 14.4 at 212°F 56 at 68°F 29 5.90 at 68 – 392°F 0.11 at 68°F to 212°F 2700 to 2790
6.5 at 68 – 1112°F

Call us at 1-800-222-6144 for more information