Penn Stainless offers Nickel 200 (UNS N02200) in the following tubular forms:
- Welded Alloy 200 Pipe
- Welded Alloy 200 Tube
- Seamless Alloy 200 Pipe
- Seamless Alloy 200 Tube
Please click on each of the below tabs to review different sections of the data sheet.
Alloy 200 is commercially pure with good mechanical properties and high thermal and electrical conductivities. Its resistance to corrosion in acids and alkalies make it a useful option.
- chemical shipping drums
- synthetic fiber production
- aerospace and missile components
- food handling applications
ASTM/ASME……….. UNS N02200
DIN…………………. . 2.4066
- Alloy 200 has outstanding resistance to caustic alkalies up to and including the molten state
- Although most useful in reducing environments, it can be used also
under oxidizing conditions that cause the development of a passive oxide film
- When machining, this material tends to flow under pressure of the tool cutting edge and form long stringy chips. To avoid a built-up edge, tools should be ground with very high positive rake angles; 40° to 45° rake angles have been used in some instances. High-speed-steel or cast-alloy tools should be used.
- Nickel 200 can be joined by conventional welding, brazing
and soldering processes.
||Tensile Strength (ksi) min
||Yield Strength 0.2% offset (ksi) min
||Elongation (% in 50mm) min
Thermal Expansion (min/in)-°F
|Thermal Conductivity BTU/hr-ft-°F
||Specific Heat BTU/lbm -°F
|at 68 °F
||at 68 – 212°F
||at 68 – 212°F
(20 – 100°C)
|at 32 – 212°F
Call us at 1-800-222-6144 for more information