800-222-6144

Seamless Nickel Alloy Tube

Penn Stainless stocks some seamless nickel alloy tube, and we can also ship from our mill depot location.  For pipes with diameters of 1.5″ and under, custom orders can be produced in a few weeks depending on quantities and the alloy.

Also, take a minute to learn about our Processing Services and Testing Services for seamless nickel tube.

Seamless Nickel Alloy Tube  Overview

Outside Diameter Range for Nickel Alloy Tube

Standard sizes up to 3.5″ diameter. Also, Penn Stainless can provide non standard sizes.  Contact us for availability. More Info Get a Quote

Nickel Alloy Grades Available in Seamless Tube

Alloy 20 - Alloy 200 - Alloy 400 - C-276  Additional Grades Available More Info Get a Quote

Seamless Nickel Alloy Tube Supply Highlights

Custom Orders

For seamless Tube, there is very little domestic manufacturing capability. If quick delivery is needed, we will check our inventory or work with our mill depot partners to fill your requirement. In some cases, we can hone an ID or turn an OD of off-the shelf nickel pipe or tube products to produce a custom size with reduced delivery times.

More Info

Technical Question?

Custom Processing & Quick Delivery of Off the Shelf Nickel Alloys

Our ability to quickly procure seamless pipe and tube in a variety of sizes and grades including Alloy 20Alloy 200Alloy 400C-276 allows us to cut, pack and ship your order quickly from a number of conveniently located stocking locations. Get a Quote More Info Technical Question?

Nickel Alloy Pipe and Tube Cutting Services

Penn Stainless has in house tubular cutting services for diameters ranging from 1/16″ to 28″ diameter. Products with larger diameters can be cut through our partner relationships with pipe and tube mills. More Info Technical Question?

Nickel Alloy Pipe and Tube Value Added Services

Value added processing services available include polishing, beveling, honing and turning, heat treating and annealing, and more. Tubes can be polished per customer request in #4 polish, #6 polish, #7 polish, & #8 mirror finish. Some ID Sizes can also be polished. More Info Technical Question?

Testing Services

We can deliver seamless pipe and tube that meets any of the following testing requirements: positive material identification, liquid penetrant testing, radiographic testing, ultrasonic testing, Charpy impact testing and corrosion testing.
More Info Technical Question?

Nickel Alloy Pipe and Tube Technical Resources

Penn Stainless has over 30 years of technical services and project management experience. Our resources include metallurgists, welding experts, specification development, a rapid delivery team, and inventory management services. More Info Technical Question?

Nickel Alloy Grades

Nickel 20

This iron-based, austenitic alloy with excellent corrosion resistance can sometimes be a cost-effective substitute for higher cost alloys if it the necessary resistance is obtained in the chosen media. Data Sheet Get a Quote

Nickel 200

This commercially pure nickel alloy has good mechanical properties over a wide range of temperatures, as well as corrosion resistance to hydroxides. Data Sheet
Get a Quote

Nickel 201

As the low-carbon version of Nickel 200, this alloy is preferred for applications involving exposure to temperatures above 600 degrees Fahrenheit. Data Sheet Get a Quote

Nickel 400

Also known as Monel© 400, this nickel-copper alloy is known for its corrosion resistance in applications involving sea water and caustic solutions. Data Sheet Get a Quote

Nickel 600

Also known as Inconel® 600, this material is a nonmagnetic, nickel-based, high temperature alloy possessing an excellent combination of high strength and hot and cold workability. Data Sheet Get a Quote

Nickel 601

INCONEL alloy 601 is a general-purpose engineering material for applications that require resistance to heat and corrosion. Data Sheet Get a Quote

Nickel 625

Also known as Inconel® 625, this nickel-chromium alloy is used for its high strength, ease of fabrication (including joining), and outstanding corrosion resistance. Data Sheet Get a Quote

Nickel 800H

A widely used material of construction for equipment that must have high strength and resist oxidation, carburization, and other harmful effects of high-temperature exposure. Data Sheet Get a Quote

Nickel 800HT

Commonly referred to as Incoloy© 800H, this alloy is for high temperature applications requiring optimum creep and rupture properties. Data Sheet  Get a Quote

Nickel 825

Incoloy alloy 825 is a nickel iron chromium alloy with of molybdenum, copper and titanium, with exceptional resistance to many aggressive corrosion environments. Data Sheet Get a Quote

Nickel 904L

Grade 904L stainless steel is a non-stabilized austenitic stainless steel with low carbon content. This high alloy stainless steel is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid.  Data Sheet  Get a Quote

In addition to the sizes below, Penn Stainless can also ship some larger sizes and additional grades from our mill depot locations. Please contact us for availability.

Nominal OD x Wall

Nominal ID

Nominal Wt./Ft.

Grade

1/16″ x 0.010

0.0425

0.006

Alloy 400

1/16″ x 0.010

0.0425

0.006

Alloy 600

1/16″ x 0.020

0.0225

0.010

Alloy 600

1/8″ x 0.010

0.105

0.014

Alloy 600

1/8″ x 0.012

0.101

0.016

Alloy 600

1/8″ x 0.016

0.093

0.021

Alloy 600

1/8″ x 0.020

0.085

0.025

Alloy 200

1/8″ x 0.020

0.085

0.025

Alloy 400

1/8″ x 0.020

0.085

0.025

Alloy 600

1/8″ x 0.020

0.085

0.025

Alloy 625

1/8″ x 0.028

0.069

0.033

Alloy 200/201

1/8″ x 0.028

0.069

0.033

Alloy 400

1/8″ x 0.028

0.069

0.033

Alloy 600

1/8″ x 0.028

0.069

0.033

Alloy 625

1/8″ x 0.035

0.055

0.038

Alloy 20

1/8″ x 0.035

0.055

0.038

Alloy 200

1/8″ x 0.035

0.055

0.038

Alloy 400

1/8″ x 0.035

0.055

0.038

Alloy 600

3/16″ x 0.010

0.1675

0.021

Alloy 600

3/16″ x 0.016

0.1555

0.033

Alloy 200

3/16″ x 0.016

0.1555

0.033

Alloy 600

3/16″ x 0.020

0.1475

0.040

Alloy 600

3/16″ x 0.028

0.1315

0.054

Alloy 200

3/16″ x 0.028

0.1315

0.054

Alloy 600

3/16″ x 0.028

0.1315

0.054

Alloy 625

3/16″ x 0.035

0.1175

0.064

Alloy 200

3/16″ x 0.035

0.1175

0.064

Alloy 400

3/16″ x 0.035

0.1175

0.064

Alloy 600

3/16″ x 0.035

0.1175

0.064

Alloy 625

3/16″ x 0.035

0.1175

0.064

Alloy 800

3/16″ x 0.049

0.0895

0.082

Alloy 600

1/4″ x 0.018

0.214

0.050

Alloy 600

1/4″ x 0.020

0.21

0.055

Alloy 200

1/4″ x 0.020

0.21

0.055

Alloy 400

1/4″ x 0.020

0.21

0.055

Alloy 600

1/4″ x 0.028

0.194

0.075

Alloy 200

1/4″ x 0.028

0.194

0.075

Alloy 400

1/4″ x 0.028

0.194

0.075

Alloy 600

1/4″ x 0.035

0.18

0.091

Alloy 20

1/4″ x 0.035

0.18

0.091

Alloy 200

1/4″ x 0.035

0.18

0.091

Alloy 400

1/4″ x 0.035

0.18

0.091

Alloy 600

1/4″ x 0.035

0.18

0.091

Alloy 800

1/4″ x 0.035

0.18

0.091

Alloy 800H

1/4″ x 0.035

0.18

0.091

Alloy 825

1/4″ x 0.049

0.152

0.119

Alloy 20

1/4″ x 0.049

0.152

0.119

Alloy 200

1/4″ x 0.049

0.152

0.119

Alloy 400

1/4″ x 0.049

0.152

0.119

Alloy 600

1/4″ x 0.049

0.152

0.119

Alloy 718

1/4″ x 0.049

0.152

0.119

Alloy 800

1/4″ x 0.065

0.12

0.145

Alloy 20

1/4″ x 0.065

0.12

0.145

Alloy 200

1/4″ x 0.065

0.12

0.145

Alloy 400

1/4″ x 0.065

0.12

0.145

Alloy 600

1/4″ x 0.065

0.12

0.145

Alloy 800H

1/4″ x 0.065

0.12

0.145

Alloy 825

1/4″ x 0.083

0.084

0.167

Alloy 400

5/16″ x 0.020

0.2725

0.070

Alloy 600

5/16″ x 0.028

0.2565

0.096

Alloy 600

5/16″ x 0.035

0.2425

0.117

Alloy 400

5/16″ x 0.035

0.2425

0.117

Alloy 600

5/16″ x 0.065

0.1825

0.194

Alloy 400

5/16″ x 0.028

0.2565

0.096

Alloy 800

5/16″ x 0.028

0.2565

0.096

Alloy 800H

5/16″ x 0.035

0.2425

0.117

Alloy 200

5/16″ x 0.049

0.2145

0.155

Alloy 600

5/16″ x 0.065

0.1825

0.194

Alloy 200

5/16″ x 0.065

0.1825

0.194

Alloy 600

3/8″ x 0.020

0.335

0.085

Alloy 600

3/8″ x 0.028

0.319

0.117

Alloy 200

3/8″ x 0.028

0.319

0.117

Alloy 400

3/8″ x 0.028

0.319

0.117

Alloy 600

3/8″ x 0.035

0.305

0.143

Alloy 20

3/8″ x 0.035

0.305

0.143

Alloy 200

3/8″ x 0.035

0.305

0.143

Alloy 400

3/8″ x 0.035

0.305

0.143

Alloy 600

3/8″ x 0.035

0.305

0.143

Alloy 800H

3/8″ x 0.049

0.277

0.192

Alloy 20

3/8″ x 0.049

0.277

0.192

Alloy 200

3/8″ x 0.049

0.277

0.192

Alloy 400

3/8″ x 0.049

0.277

0.192

Alloy 600

3/8″ x 0.049

0.277

0.192

Alloy 625

3/8″ x 0.049

0.277

0.192

Alloy 800H

3/8″ x 0.049

0.277

0.192

Alloy 825

3/8″ x 0.065

0.245

0.243

Alloy 200

3/8″ x 0.065

0.245

0.243

Alloy 400

3/8″ x 0.065

0.245

0.243

Alloy 600

3/8″ x 0.065

0.245

0.243

Alloy 800

3/8″ x 0.065

0.245

0.243

Alloy 800H

3/8″ x 0.065

0.245

0.243

Alloy 825

3/8″ x 0.083

0.209

0.292

Alloy 400

3/8″ x 0.083

0.209

0.292

Alloy 600

7/16″ x 0.035

0.3675

0.170

Alloy 600

7/16″ x 0.065

0.3075

0.291

Alloy 600

1/2″ x 0.028

0.444

0.159

Alloy 200

1/2″ x 0.028

0.444

0.159

Alloy 400

1/2″ x 0.028

0.444

0.159

Alloy 600

1/2″ x 0.028

0.444

0.159

Alloy 800

1/2″ x 0.035

0.43

0.196

Alloy 20

1/2″ x 0.035

0.43

0.196

Alloy 200

1/2″ x 0.035

0.43

0.196

Alloy 400

1/2″ x 0.035

0.43

0.196

Alloy 600

1/2″ x 0.035

0.43

0.196

Alloy 718

1/2″ x 0.035

0.43

0.196

Alloy 800H

1/2″ x 0.035

0.43

0.196

Alloy 800

1/2″ x 0.049

0.402

0.266

Alloy 20

1/2″ x 0.049

0.402

0.266

Alloy 200

1/2″ x 0.049

0.402

0.266

Alloy 400

1/2″ x 0.049

0.402

0.266

Alloy 600

1/2″ x 0.049

0.402

0.266

Alloy 800H

1/2″ x 0.049

0.402

0.266

Alloy 825

1/2″ x 0.058

0.384

0.309

Alloy 400

1/2″ x 0.058

0.384

0.309

Alloy 600

1/2″ x 0.065

0.37

0.340

Alloy 20

1/2″ x 0.065

0.37

0.340

Alloy 200

1/2″ x 0.065

0.37

0.340

Alloy 400

1/2″ x 0.065

0.37

0.340

Alloy 600

1/2″ x 0.065

0.37

0.340

Alloy 601

1/2″ x 0.065

0.37

0.340

Alloy 800H

1/2″ x 0.065

0.37

0.340

Alloy 800

1/2″ x 0.083

0.334

0.417

Alloy 400

1/2″ x 0.083

0.334

0.417

Alloy 600

1/2″ x 0.083

0.334

0.417

Alloy 800H

1/2″ x 0.083

0.334

0.417

Alloy 825

1/2″ x 0.095

0.31

0.463

Alloy 400

1/2″ x 0.095

0.31

0.463

Alloy 600

1/2″ x 0.109

0.282

0.513

Alloy 600

1/2″ x 0.109

0.282

0.513

Alloy 400

1/2″ x 0.109

0.282

0.513

Alloy 600

9/16″ x 0.035

0.4925

0.222

Alloy 400

9/16″ x 0.035

0.4925

0.222

Alloy 600

9/16″ x 0.035

0.4925

0.222

Alloy 800

9/16″ x 0.049

0.4645

0.303

Alloy 600

9/16″ x 0.049

0.4645

0.303

Alloy 800

9/16″ x 0.065

0.4325

0.389

Alloy 600

9/16″ x 0.065

0.4325

0.389

Alloy 800H

5/8″ x 0.035

0.555

0.249

Alloy 200

5/8″ x 0.035

0.555

0.249

Alloy 400

5/8″ x 0.035

0.555

0.249

Alloy 600

5/8″ x 0.035

0.555

0.249

Alloy 800H

5/8″ x 0.049

0.527

0.340

Alloy 20

5/8″ x 0.049

0.527

0.340

Alloy 200

5/8″ x 0.049

0.527

0.340

Alloy 400

5/8″ x 0.049

0.527

0.340

Alloy 600

5/8″ x 0.049

0.527

0.340

Alloy 800

5/8″ x 0.049

0.527

0.340

Alloy 800H

5/8″ x 0.049

0.527

0.340

Alloy 825

5/8″ x 0.065

0.495

0.438

Alloy 20

5/8″ x 0.065

0.495

0.438

Alloy 200

5/8″ x 0.065

0.495

0.438

Alloy 400

5/8″ x 0.065

0.495

0.438

Alloy 600

5/8″ x 0.065

0.495

0.438

Alloy 800H

5/8″ x 0.083

0.459

0.541

Alloy 400

5/8″ x 0.083

0.459

0.541

Alloy 600

5/8″ x 0.095

0.435

0.606

Alloy 400

5/8″ x 0.095

0.435

0.606

Alloy 600

5/8″ x 0.120

0.385

0.729

Alloy 600

3/4″ x 0.028

0.694

0.243

Alloy 600

3/4″ x 0.035

0.68

0.301

Alloy 20

3/4″ x 0.035

0.68

0.301

Alloy 200

3/4″ x 0.035

0.68

0.301

Alloy 400

3/4″ x 0.035

0.68

0.301

Alloy 600

3/4″ x 0.035

0.68

0.301

Alloy 800H

3/4″ x 0.035

0.68

0.301

Alloy 825

3/4″ x 0.049

0.652

0.413

Alloy 20

3/4″ x 0.049

0.652

0.413

Alloy 200

3/4″ x 0.049

0.652

0.413

Alloy 400

3/4″ x 0.049

0.652

0.413

Alloy 600

3/4″ x 0.049

0.652

0.413

Alloy 800H

3/4″ x 0.049

0.652

0.413

Alloy 825

3/4″ x 0.065

0.62

0.536

Alloy 20

3/4″ x 0.065

0.62

0.536

Alloy 200

3/4″ x 0.065

0.62

0.536

Alloy 400

3/4″ x 0.065

0.62

0.536

Alloy 600

3/4″ x 0.065

0.62

0.536

Alloy 718

3/4″ x 0.065

0.62

0.536

Alloy 800H

3/4″ x 0.065

0.62

0.536

Alloy 825

3/4″ x 0.083

0.584

0.666

Alloy 20

3/4″ x 0.083

0.584

0.666

Alloy 200

3/4″ x 0.083

0.584

0.666

Alloy 400

3/4″ x 0.083

0.584

0.666

Alloy 600

3/4″ x 0.083

0.584

0.666

Alloy 800H

3/4″ x 0.083

0.584

0.666

Alloy 825

3/4″ x 0.095

0.56

0.749

Alloy 400

3/4″ x 0.095

0.56

0.749

Alloy 600

3/4″ x 0.109

0.532

0.841

Alloy 20

3/4″ x 0.109

0.532

0.841

Alloy 200

3/4″ x 0.109

0.532

0.841

Alloy 400

3/4″ x 0.109

0.532

0.841

Alloy 600

3/4″ x 0.120

0.51

0.910

Alloy 200/201

3/4″ x 0.120

0.51

0.910

Alloy 600

3/4″ x 0.125

0.5

0.940

Alloy 400

3/4″ x 0.125

0.5

0.940

Alloy 600

7/8″ x 0.035

0.805

0.354

Alloy 400

7/8″ x 0.035

0.805

0.354

Alloy 600

7/8″ x 0.035

0.805

0.354

Alloy 800H

7/8″ x 0.035

0.805

0.354

Alloy 800

7/8″ x 0.049

0.777

0.487

Alloy 400

7/8″ x 0.049

0.777

0.487

Alloy 600

7/8″ x 0.049

0.777

0.487

Alloy 800H

7/8″ x 0.065

0.745

0.634

Alloy 200

7/8″ x 0.065

0.745

0.634

Alloy 400

7/8″ x 0.065

0.745

0.634

Alloy 600

7/8″ x 0.065

0.745

0.634

Alloy 800H

7/8″ x 0.083

0.709

0.791

Alloy 200

7/8″ x 0.083

0.709

0.791

Alloy 600

7/8″ x 0.120

0.635

1.090

Alloy 600

1″ x 0.028

0.944

0.328

Alloy 625

1″ x 0.035

0.93

0.407

Alloy 20

1″ x 0.035

0.93

0.407

Alloy 200

1″ x 0.035

0.93

0.407

Alloy 400

1″ x 0.035

0.93

0.407

Alloy 600

1″ x 0.035

0.93

0.407

Alloy 800H

1″ x 0.049

0.902

0.561

Alloy 20

1″ x 0.049

0.902

0.561

Alloy 200

1″ x 0.049

0.902

0.561

Alloy 400

1″ x 0.049

0.902

0.561

Alloy 600

1″ x 0.049

0.902

0.561

Alloy 718

1″ x 0.049

0.902

0.561

Alloy 800H

1″ x 0.065

0.87

0.732

Alloy 20

1″ x 0.065

0.87

0.732

Alloy 200

1″ x 0.065

0.87

0.732

Alloy 400

1″ x 0.065

0.87

0.732

Alloy 600

1″ x 0.065

0.87

0.732

Alloy 601

1″ x 0.065

0.87

0.732

Alloy 625

1″ x 0.065

0.87

0.732

Alloy 800H

1″ x 0.065

0.87

0.732

Alloy 825

1″ x 0.083

0.834

0.916

Alloy 20

1″ x 0.083

0.834

0.916

Alloy 200

1″ x 0.083

0.834

0.916

Alloy 400

1″ x 0.083

0.834

0.916

Alloy 600

1″ x 0.083

0.834

0.916

Alloy 625

1″ x 0.083

0.834

0.916

Alloy 800H

1″ x 0.083

0.834

0.916

Alloy 825

1″ x 0.095

0.81

1.035

Alloy 400

1″ x 0.095

0.81

1.035

Alloy 600

1″ x 0.095

0.81

1.035

Alloy 800H

1″ x 0.109

0.782

1.169

Alloy 20

1″ x 0.109

0.782

1.169

Alloy 200

1″ x 0.109

0.782

1.169

Alloy 400

1″ x 0.109

0.782

1.169

Alloy 600

1″ x 0.120

0.76

1.271

Alloy 400

1″ x 0.120

0.76

1.271

Alloy 600

1″ x 0.120

0.76

1.271

Alloy 800H

1″ x 0.125

0.75

1.316

Alloy 600

1″ x 0.134

0.732

1.397

Alloy 200

1″ x 0.134

0.732

1.397

Alloy 400

1-1/8″ x 0.049

1.027

0.635

Alloy 400

1-1/4″ x 0.035

1.18

0.512

Alloy 400

1-1/4″ x 0.035

1.18

0.512

Alloy 600

1-1/4″ x 0.035

1.18

0.512

Alloy 625

1-1/4″ x 0.049

1.152

0.708

Alloy 400

1-1/4″ x 0.065

1.12

0.927

Alloy 20

1-1/4″ x 0.065

1.12

0.927

Alloy 200

1-1/4″ x 0.065

1.12

0.927

Alloy 400

1-1/4″ x 0.065

1.12

0.927

Alloy 600

1-1/4″ x 0.065

1.12

0.927

Alloy 800H

1-1/4″ x 0.083

1.084

1.166

Alloy 200/201

1-1/4″ x 0.083

1.084

1.166

Alloy 400

1-1/4″ x 0.083

1.084

1.166

Alloy 600

1-1/4″ x 0.083

1.084

1.166

Alloy 800H

1-1/4″ x 0.095

1.06

1.321

Alloy 400

1-1/4″ x 0.109

1.032

1.497

Alloy 600

1-1/4″ x 0.120

1.01

1.632

Alloy 200

1-1/4″ x 0.120

1.01

1.632

Alloy 600

1-1/4″ x 0.125

1

1.693

Alloy 400

1-1/2″ x 0.028

1.444

0.496

Alloy 625

1-1/2″ x 0.035

1.43

0.617

Alloy 600

1-1/2″ x 0.035

1.43

0.617

Alloy 625

1-1/2″ x 0.049

1.402

0.856

Alloy 400

1-1/2″ x 0.049

1.402

0.856

Alloy 600

1-1/2″ x 0.049

1.402

0.856

Alloy 625

1-1/2″ x 0.065

1.37

1.123

Alloy 20

1-1/2″ x 0.065

1.37

1.123

Alloy 200

1-1/2″ x 0.065

1.37

1.123

Alloy 400

1-1/2″ x 0.065

1.37

1.123

Alloy 600

1-1/2″ x 0.065

1.37

1.123

Alloy 800H

1-1/2″ x 0.083

1.334

1.416

Alloy 200

1-1/2″ x 0.083

1.334

1.416

Alloy 400

1-1/2″ x 0.083

1.334

1.416

Alloy 600

1-1/2″ x 0.095

1.31

1.607

Alloy 400

1-1/2″ x 0.095

1.31

1.607

Alloy 600

1-1/2″ x 0.109

1.282

1.825

Alloy 200/201

1-1/2″ x 0.109

1.282

1.825

Alloy 400

1-1/2″ x 0.109

1.282

1.825

Alloy 600

1-1/2″ x 0.120

1.26

1.993

Alloy 200

1-1/2″ x 0.120

1.26

1.993

Alloy 400

1-1/2″ x 0.120

1.26

1.993

Alloy 600

1-1/2″ x 0.125

1.25

2.069

Alloy 600

1-5/8″ x 0.065

1.495

1.220

Alloy 400

1-5/8″ x 0.083

1.459

1.540

Alloy 200

1-5/8″ x 0.035

1.555

0.670

Alloy 625

1-3/4″ x 0.065

1.62

1.318

Alloy 400

1-3/4″ x 0.065

1.62

1.318

Alloy 600

1-7/8″ x 0.083

1.709

1.790

Alloy 200

2″ x 0.035

1.93

0.828

Alloy 600

2″ x 0.049

1.902

1.151

Alloy 600

2″ x 0.065

1.87

1.514

Alloy 20

2″ x 0.065

1.87

1.514

Alloy 200

2″ x 0.065

1.87

1.514

Alloy 400

2″ x 0.065

1.87

1.514

Alloy 600

2″ x 0.065

1.87

1.514

Alloy 800H

2″ x 0.083

1.834

1.915

Alloy 20

2″ x 0.083

1.834

1.915

Alloy 200

2″ x 0.083

1.834

1.915

Alloy 400

2″ x 0.083

1.834

1.915

Alloy 600

2″ x 0.095

1.81

2.178

Alloy 600

2″ x 0.109

1.782

2.481

Alloy 200

2″ x 0.109

1.782

2.481

Alloy 600

2″ x 0.120

1.76

2.715

Alloy 200/201

2″ x 0.120

1.76

2.715

Alloy 400

2″ x 0.120

1.76

2.715

Alloy 800H

2″ x 0.120

1.76

2.715

Alloy 800H

2″ x 0.125

1.75

2.821

Alloy 600

2-1/4″ x 0.120

2.01

3.076

Alloy 600

2-1/2″ x 0.065

2.37

1.905

Alloy 200

2-1/2″ x 0.065

2.37

1.905

Alloy 400

2-1/2″ x 0.065

2.37

1.905

Alloy 600

2-1/2″ x 0.083

2.334

2.415

Alloy 200

2-1/2″ x 0.083

2.334

2.415

Alloy 400

2-1/2″ x 0.120

2.26

3.438

Alloy 400

2-1/2″ x 0.120

2.26

3.438

Alloy 600

3″ x 0.065

2.87

2.296

Alloy 200

3″ x 0.065

2.87

2.296

Alloy 400

3″ x 0.065

2.87

2.296

Alloy 600

3″ x 0.083

2.834

2.914

Alloy 200

3″ x 0.083

2.834

2.914

Alloy 400

3″ x 0.083

2.834

2.914

Alloy 600

3″ x 0.120

2.76

4.160

Alloy 200

3″ x 0.120

2.76

4.160

Alloy 600

3″ x 0.125

2.75

4.326

Alloy 600

3″ x 0.250

2.5

8.275

Alloy 600

3-1/4″ x 0.125

3

4.702

Alloy 600

3-1/2″ x 0.375

2.75

14.105

Alloy 600

Nickel Alloy Seamless Tube Specifications

ASTM B165

This specification discusses nickel-copper alloy UNS N04400 formed into cold-worked seamless pipe and tube. More Info Technical Question?

ASTM B167

This specification discusses nickel-chromium-iron alloys and nickel-chromium-cobalt molybdenum alloys in cold-worked annealed, hot-worked annealed, and hot-finished seamless pipe and tube meant for general corrosion resistant and/or heat resistant applications. More Info Technical Question?

ASTM B407

This specification discusses the base requirements for nickel-iron-chromium alloys formed into cold-worked and hot-finished annealed seamless pipe and tube. More Info Technical Question?

ASTM B423

This specification discusses nickel-iron-chromium-molybdenum-copper alloys formed into cold-worked and hot-finished seamless pipe and tube to be used for general corrosive service. More Info Technical Question?

ASTM B444

This specification discusses nickel-chromium-molybdenum-silicon alloy formed into cold-worked seamless pipe and tube. More Info Technical Question?

ASTM B622

This specification discusses seamless pipe and tube of nickel and nickel-cobalt alloys. More Info Technical Question?

ASTM B668

This specification covers the standard requirements for UNS N08028 seamless cold-finished or hot-finished pipe and tube intended for general corrosive services. More Info Technical Question?

ASTM B677

This specification covers UNS N08925, N08354, and N08926 alloy seamless, cold-worked or hot-finished pipes and tubes for use in general corrosive service. More Info Technical Question?

ASTM B722

This specification discusses hot or cold-finished seamless pipes made from an alloy to be used for heat and corrosion resistance applications. More Info Technical Question?

ASTM B729

This specification discusses nickel-alloy seamless, cold-worked or hot-finished pipe and tube to be used for general corrosive service. More Info Technical Question?

ASTM B829

This general specification comprises the mandatory requirements of the ASTM standards listed herein for nickel and nickel alloy seamless pipe and tube. More Info Technical Question?

Call us at 1-800-222-6144 for more information