Home / Structural / Tees

Tees

Penn Stainless Products supplies stainless structural tees in 304/304L and 316/316L. Stainless structural tees are primarily rolled or extruded up to 4″ with thickness up to ½”  Larger tee sections can be manufactured utilizing laser fusion technology. Laser fused technology also enables engineers and metal buyers to mix thickness or even material grades. Laser fused tees can also be supplied in Duplex 2205 and lean Duplex 2201.

All tees can be cut to size. Stainless tees can be supplied with a polished finish.  See below for details specific to stainless steel tees. Also, see our Structural Products page for Structural product overview information, including manufacturing techniques.

Product Variations
(Available)
(Call for Availability)
(Unavailable)
Choose Table:
304/304LSwipe/scroll horizontally to view full table
DimensionsABCEst Wt*Availability
3/4 x 3/4 x 1/83/43/41/8N/AC
3/4 x 3/4 x 3/163/43/43/160.80
1 x 1 x 1/8111/8N/A
1 x 1 x 3/16113/161.20C
1-1/2 x 1-1/2 x 3/161-1/21-1/23/161.90
1-1/2 x 1-1/2 x 1/41-1/21-1/21/42.43
1-3/4 x 1-3/4 x 3/161-3/41-3/43/162.16
2 x 2 x 3/16223/162.44C
2 x 2 x 1/4221/43.62
2-1/2 x 2-1/2 x1/42-1/22-1/21/44.60
3 x 3 x 1/4331/44.97C
3 x 3 x 3/8333/87.30
4 x 4 x 1/4441/46.70C
4 x 4 x 3/8443/89.74
5 x 5 x 1/4551/48.40
5 x 5 x 3/8553/812.40C
5 x 5 x 1/2551/216.30
6 x 6 x 1/4661/410.10
6 x 6 x 3/8663/815.30
6 x 6 x 1/2661/219.70
7 x 7 x 1/4771/411.80
7 x 7 x 3/8773/817.50
7 x 7 x 1/2771/223.10
8 x 8 x 1/4881/413.50C
8 x 8 x 3/8883/820.10
8 x 8 x 1/2881/226.50C

316/316LSwipe/scroll horizontally to view full table
DimensionsABCEst Wt*Availability
3/4 x 3/4 x 1/83/43/41/8N/AC
3/4 x 3/4 x 3/163/43/43/160.80C
1 x 1 x 1/8111/8N/AC
1 x 1 x 3/16113/161.20C
1-1/2 x 1-1/2 x 3/161-1/21-1/23/161.90C
1-1/2 x 1-1/2 x 1/41-1/21-1/21/42.43C
1-3/4 x 1-3/4 x 3/161-3/41-3/43/162.16C
2 x 2 x 3/16223/162.44C
2 x 2 x 1/4221/43.62C
2-1/2 x 2-1/2 x1/42-1/22-1/21/44.60C
3 x 3 x 1/4331/44.97C
3 x 3 x 3/8333/87.30C
4 x 4 x 1/4441/46.70C
4 x 4 x 3/8443/89.74C
5 x 5 x 1/4551/48.40C
5 x 5 x 3/8553/812.40C
5 x 5 x 1/2551/216.30C
6 x 6 x 1/4661/410.10C
6 x 6 x 3/8663/815.30C
6 x 6 x 1/2661/219.70C
7 x 7 x 1/4771/411.80C
7 x 7 x 3/8773/817.50C
7 x 7 x 1/2771/223.10C
8 x 8 x 1/4881/413.50C
8 x 8 x 3/8883/820.10C
8 x 8 x 1/2881/226.50C

Processing
Tee Polishing
More Info
Tee Cutting
More Info
Production Cutting
More Info
Value-Added Services
  • 1 piece or 500 pieces, Tees can be cut to your exact requirements.
  • Polishing is available upon request.
  • Full traceability with original mill test reports available
Forming

Beam and angle forming is a process used to bend an iron to a specific degree or angle.Typically beam forming differs from angle iron rolling, in that it is more concerned with forming the angle iron to a specific angle or degree, rather than a curve or radius. Beam forming processes use applied force to a piece of sheet metal to modify its geometry rather than remove any material, often using a die to create specific shapes (ie I Beams, Tees, etc). The applied force stresses the metal beyond its yield strength, causing the material to  deform, but not to fail. By doing so, the sheet can be bent or stretched into a variety of complex shapes.

Polishing

Positive Material Identification (PMI)

In some cases, it may be necessary to complete additional positive material identification testing. Penn Stainless Products can complete this testing in house or we can work with an independent laboratory to complete the testing. Please contact us for specific requirements.